It is important to understand that the irontite ceramic seals are very crucial to the people who understand their use in the cooling system. The vehicles are just like the body of a human being and need to be maintained for proper functioning. For a car to work well, there are so many things that must be in place. It is essential to note that the engine of a vehicle plus the cooling system ought to be maintained at a certain temperature after a certain duration.
The irontite ceramic seals are necessary for coating the cooling system in the engine. You need to understand the importance of cleaning the engine before applying this product. Irontite thoro-flush is the product used in cleaning the system. You need to understand that there is a guideline that should be followed when applying the irontite ceramic seals on the cooling system. Here is what you need to do.
One of the things that you need to do is cleaning and flushing the coolant system. It is essential to learn that the irontite thoro-flush is the product which is normally used here. This product is used alongside clean water. The rinsing is done at least twice to ensure that it is clean and dust-free. The next thing that you are supposed to do is filling the radiator with water and the thro-flush. The hose should be capped directly into the mouth of the radiator. One is supposed to understand that it is only possible to use this method in case the radiator is not pressurized. One is supposed to have in mind that the bottle containing the product will then require proper shaking. It is necessary to learn that water and the ceramic seal are then filled into the coolant system. The water should be clean and soft to avoid corrosion of the parts.
The ceramic seal will stain the required parts. It is important that you clear any stains on the neck and cap of the radiator. You should ensure that you recap the radiator once it is cleared of any stain. It is then required that you fill the overflow tank with some water before running the vehicle. Run the engine for at least one hour before flushing it with water. The coolant system should then be left open for at least 12 hours to allow it dry. Once the system has dried, it is recommended that a coolant mixture is added to prevent it from cracking and leaking.